R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

204
<Sysname> display isis interface statistics
Interface Statistics information for ISIS(1)
--------------------------------------------
Type IPv4 Up/Down IPv6 Up/Down
LAN 1/0 0/0
P2P 0/0 0/0
Table 55 Command output
Field Descri
p
tion
Type
Network type of the interface:
• LAN for broadcast network.
• P2P for point-to-point network.
IPv4 UP Number of IS-IS interfaces in up state.
IPv4 Down Number of IS-IS interfaces in down state.
IPv6 UP
Number of IS-ISv6 interfaces in up state. If IPv6 is not
enabled, this field displays 0.
IPv6 Down
Number of IS-ISv6 interfaces in down state. If IPv6 is not
enabled, this field displays 0.
display isis lsdb
Use display isis lsdb to display IS-IS LSDB information.
Syntax
MSR2000/MSR3000:
display isis lsdb [ [ level-1 | level-2 ] | local | [ lsp-id lspid | lsp-name lspname ] | verbose ] *
[ process-id ]
MSR4000:
display isis lsdb [ [ level-1 | level-2 ] | local | [ lsp-id lspid | lsp-name lspname ] | verbose ] *
[ process-id ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level-1: Displays the level-1 LSDB.
level-2: Displays the level-2 LSDB.
local: Displays LSP information generated locally.
lsp-id lspid: Specifies an LSP ID, in the form of sysID. Pseudo ID-fragment num, where sysID represents the
originating node or pseudo node. Pseudo ID is separated by a dot from sysID and by a hyphen from
fragment num.