R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

205
lspname: Specifies the LSP name, in the form of Symbolic name.Pseudo ID-fragment num, where Pseudo
ID is separated by a dot from Symbolic name and by a hyphen from fragment num. If the Pseudo ID is 0,
specify the LSP name in the form Symbolic name-fragment num.
verbose: Displays LSDB detailed information. Without this keyword, the command displays brief
information about LSDB.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. Without this argument, the
command displays LSDBs for all IS-IS processes.
standby slot slot-number: Displays backup IS-IS LSDB information for a card. Without this option, the
command displays IS-IS LSDB information.
Usage guidelines
If no level is specified, the command displays both Level-1 and Level-2 LSDB information.
Examples
# Display brief Level-1 LSDB information.
<Sysname> display isis lsdb level-1
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
---------------------------
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
-------------------------------------------------------------------------------
0000.0000.0001.00-00* 0x00000087 0xf846 1152 183 0/0/0
0000.0000.0003.00-00 0x00000005 0x4bee 520 177 0/0/0
0000.0000.0003.00-01 0x00000004 0x7245 520 45 0/0/0
0000.0000.0011.00-00 0x0000000b 0xcdf6 815 183 0/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
# Display detailed Level-1 LSDB information.
<Sysname> display isis lsdb level-1 verbose
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
---------------------------
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
-------------------------------------------------------------------------------
0000.0000.0001.00-00* 0x00000080 0x73f 1185 183 0/0/0
Source 0000.0000.0001.00
NLPID IPv4
Area address 10
IPv4 address 192.168.220.10
MT ID 0000 0/0/0