R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

208
Field Descri
p
tion
MT ID 0000 0/0/0
MT ID 0002 0/0/0
MT ID 0006 0/0/0
Topology supported by the originating router (0/0/0 indicates ATT/P/OL):
• 0000—Base topology.
• 0002—IPv6 unicast topology.
• 0006—IPv4 unicast topology.
NBR ID Neighbor ID of the originating router.
IPv4 unicast NBR ID IPv4 unicast neighbor information about the originating router.
IPv6 unicast NBR ID IPv4 unicast neighbor information about the originating router.
Admin group Link management group attribute.
Interface IP address IP address of the interface connected to the remote end.
Neighbor IP address Neighbor interface IP address.
Physical bandwidth Physical bandwidth.
Reservable bandwidth Reserved bandwidth.
Unreserved bandwidth for
each TE class
Available bandwidth reserved for each TE class.
TE class Available bandwidth for each of the 8 or 16 TE classes.
TE cost TE cost.
Bandwidth constraint
model
Bandwidth constraint model:
• Prestandard DS-TE RDM.
• IETF DS-TE RDM.
• IETF DS-TE MAM.
BC
Bandwidth constraint value. The Prestandard model supports 2 BCs, and the IETF
modes support at most 8 BCs.
Router ID Router ID.
IP-Internal Internal IP address and mask of the originating router.
IP-External External IP address and mask of the originating router.
IP-Extended Extended IP address and mask of the originating router.
Cost Cost.
Auth Authentication information of the originating router.
IPV6 Internal IPv6 address and prefix of the originating router.
IPV6-Ext External IPv6 address and prefix of the originating router.
IPv4 unicast IPv4 unicast reachability information about the originating router.
IPv6 unicast Internal IPv6 unicast reachability information about the originating router.
IPv6 unicast-ext External IPv6 unicast reachability information about the originating router.
display isis mesh-group
Use display isis mesh-group to display IS-IS mesh group configuration information.