R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

210
network-operator
Parameters
process-id: Displays the host name to system ID mapping table for an IS-IS process specified by its ID in
the range of 1 to 65535. Without this argument, the command displays the host name to system ID
mapping table for all IS-IS processes.
Examples
# Display the IS-IS host name to system ID mapping table.
<Sysname> display isis name-table
Name table information for IS-IS(1)
-----------------------------------
System ID Hostname Type Level
6789.0000.0001 RUTA DYNAMIC Level-1
6789.0000.0001 RUTA DYNAMIC Level-2
0000.0000.0041 RUTB STATIC Level-1
0000.0000.0041 RUTB STATIC Level-2
6789.0000.0001.01 DIS-A DYNAMIC Level-1
0000.0000.0041.01 DIS-B DYNAMIC Level-2
Table 58 Command output
Field Descri
p
tion
System ID System ID.
Hostname Host name.
Type
Mapping type:
• Static.
• Dynamic.
Level
The level on which the system ID-to-host name
mapping takes effect: Level-1 or Level-2.
display isis non-stop-routing event-log
Use display isis non-stop-routing event-log to display IS-IS NSR log information.
Syntax
display isis non-stop-routing event-log slot slot-number
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
Views
Any view