R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

211
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number.
Examples
# Display IS-IS NSR log information.
<Sysname> display isis non-stop-routing event-log slot 0
IS-IS loginfo :
Jul 20 08:34:05 2012 -Slot=0 Enter HA Block status
Jul 19 22:34:05 2012 -Slot=0 Exit HA Block status
Jul 19 22:37:53 2012 -Slot=0 Process 1 enter NSR phase (Initialization).
Jul 19 22:37:53 2012 -Slot=0 Process 1 enter NSR phase (Smooth).
Jul 19 22:37:53 2012 -Slot=0 Process 1 enter NSR phase (First SPF computation).
Jul 19 22:37:53 2012 -Slot=0 Process 1 enter NSR phase (Redistribution).
Jul 19 22:37:53 2012 -Slot=0 Process 1 enter NSR phase (Second SPF computation).
Jul 19 22:37:53 2012 -Slot=0 Process 1 enter NSR phase (LSP stability).
Jul 19 22:37:53 2012 -Slot=0 Process 1 enter NSR phase (LSP generation).
Jul 19 22:37:53 2012 -Slot=0 Process 1 enter NSR phase (Finish).
Jul 19 22:37:53 2012 -Slot=0 Process 1 NSR complete.
Table 59 Command output
Field Descri
p
tion
NSR phase
NSR phase:
• Initialization.
• Smooth.
• First SPF computation.
• Redistribution.
• Second SPF computation.
• LSP stability—Ready to generate LSPs.
• LSP generation.
• Finish.
display isis non-stop-routing status
Use display isis non-stop-routing status to display IS-IS NSR status.
Syntax
display isis non-stop-routing status
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No