R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

230
Table 69 Command output
Field Descri
p
tion
Received packets
Total Total number of received link layer packets.
Relay received
Number of inbound packets on LPUs relayed from other
cards. This count is not included in the total count of
received packets.
Relay forwarded Number of inbound packets relayed to LPUs.
Invalid service slot Number of discarded packets due to unavailable LPUs.
No matched socket
Number of discarded packets due to mismatches in input
interfaces, MAC addresses, or connection filter criteria.
Not delivered, input socket
full
Number of undelivered packets due to a socket receiving
buffer overflow.
Sent packets
Total
Total number of packets that IS-IS sent over OSI
connections.
Relay forwarded
Number of outbound packets relayed to the cards that
hosts the output interfaces. This count is not included in
the total count of sent packets.
Relay received
Number of outbound packets on the cards that hosts the
output interfaces. These packets are relayed from other
cards.
Failed Number of packets failed to be sent.
Related commands
reset osi statistics
domain-authentication send-only
Use domain-authentication send-only to configure IS-IS not to check the authentication information in the
received Level-2 packets, including LSPs, CSNPs, and PSNPs.
Use undo domain-authentication send-only to remove the configuration.
Syntax
domain-authentication send-only
undo domain-authentication send-only
Default
When domain authentication mode and password are configured, a Level-2 or Level-1-2 router checks the
authentication information in the received packets.
Views
IS-IS view
Predefined user roles
network-admin