R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

12
# Display detailed information about all routes permitted by the IP prefix list.
[Sysname] display ip routing-table prefix-list test verbose
Routes Matched by Prefix list : test
Summary Count : 1
Destination: 1.1.1.0/24
Protocol: Direct Process ID: 0
SubProtID: 0x1 Age: 04h20m37s
Cost: 0 Preference: 0
IpPre: N/A QosLocalID: N/A
Tag: 0 State: Active Adv
OrigTblID: 0x0 OrigVrf: default-vrf
TableID: 0x2 OrigAs: 0
NibID: 0x10000003 LastAs: 0
AttrID: 0xffffffff Neighbor: 0.0.0.0
Flags: 0x1008c OrigNextHop: 1.1.1.2
Label: NULL RealNextHop: 1.1.1.2
BkLabel: NULL BkNextHop: N/A
Tunnel ID: Invalid Interface: GigabitEthernet2/1/2
BkTunnel ID: Invalid BkInterface: N/A
For command output, see Table 2.
display ip routing-table protocol
Use display ip routing-table protocol to display information about routes installed by a protocol.
Syntax
MSR2000/MSR3000:
display ip routing-table [ topology topo-name | vpn-instance vpn-instance-name ] protocol protocol
[ inactive | verbose ]
MSR4000:
display ip routing-table [ topology topo-name | vpn-instance vpn-instance-name ] protocol protocol
[ inactive | verbose ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
topology topo-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters.
Without this option, the command displays routing information for the public network.
vpn-instance vpn-instance-name: Specifies MPLS L3VPN instance by its name, a case-sensitive string of
1 to 31 characters. Without this option, the command displays routing information for the public network.