R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

252
Examples
# Configure the Level-2 DIS priority as 127 for GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] isis dis-priority 127 level-2
isis enable
Use isis enable to enable an IS-IS process on an interface.
Use undo isis enable to disable IS-IS.
Syntax
isis enable [ process-id ]
undo isis enable
Default
No IS-IS process is enabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1.
Examples
# Enable IS-IS process 1 globally and enable it on the GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] quit
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] isis enable 1
Related commands
• isis
• network-entity
isis fast-reroute lfa-backup exclude
Use isis fast-reroute lfa-backup exclude to disable LFA calculation on an interface.
Use undo isis fast-reroute lfa-backup exclude to restore the default.
Syntax
isis fast-reroute lfa-backup exclude
undo isis fast-reroute lfa-backup exclude