R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

270
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
Related commands
• isis
• isis enable
non-stop-routing
Use non-stop-routing to enable IS-IS NSR.
Use undo non-stop-routing to disable IS-IS NSR.
Syntax
non-stop-routing
undo non-stop-routing
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
Views
IS-IS view
Predefined user roles
network-admin
Usage guidelines
IS-IS NSR and IS-IS GR are mutually exclusive. Therefore, do not configure the non-stop-routing
command and the graceful-restart command at the same time.
Examples
# Enable NSR for IS-IS process 1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] non-stop-routing
pic
Use pic to enable IS-IS PIC.
Use undo pic to disable IS-IS PIC.
Syntax
pic [ additional-path-always ]
undo pic
Default
IS-IS PIC is enabled.