R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

274
reset isis non-stop-routing event-log
Use reset isis non-stop-routing event-log to clear IS-IS NSR log information.
Syntax
reset isis non-stop-routing event-log slot slot-number
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number.
Examples
# Clear IS-IS NSR log information on card 1.
<Sysname> reset isis non-stop-routing event-log slot 1
reset isis peer
Use reset isis peer to clear data structure information for a specified IS-IS neighbor.
Syntax
reset isis peer system-id [ process-id ]
Views
User view
Predefined user roles
network-admin
Parameters
system-id: Specifies an IS-IS neighbor by its system ID.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535 to clear data structure
information for the neighbor in the specified IS-IS process.
Usage guidelines
Use this command when you re-establish an IS-IS neighbor relationship.
Examples
# Clear the data structure information of the neighbor with the system ID 0000.0c11.1111.
<Sysname> reset isis peer 0000.0c11.1111