R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

304
[Sysname-bgp-ipv6] default-route imported
[Sysname-bgp-ipv6] import-route ospfv3 1
# In BGP-VPN IPv6 unicast address family view, enable default route redistribution from OSPFv3 process
1 into the IPv6 BGP routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv6 unicast
[Sysname-bgp-ipv6-vpn1] default-route imported
[Sysname-bgp-ipv6-vpn1] import-route ospfv3 1
Related commands
import-route
display bgp dampening parameter
Use display bgp dampening parameter ipv4 unicast to display BGP route dampening parameters.
Syntax
display bgp dampening parameter { ipv4 | ipv6 } { multicast | [ unicast ] [ vpn-instance
vpn-instance-name ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv4: Displays BGP IPv4 route dampening parameters.
ipv6: Displays BGP IPv6 route dampening parameters.
multicast: Displays BGP multicast route dampening parameters.
unicast: Displays BGP unicast route dampening parameters.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays BGP route dampening
parameters for the public network.
Usage guidelines
By default, the unicast keyword is used if neither the multicast keyword nor the unicast keyword is
specified.
Examples
# Display BGP IPv4 unicast route dampening parameters for the public network.
<Sysname> display bgp dampening parameter ipv4
Maximum suppression time (in seconds) : 3973
Ceiling value : 16000
Reuse value : 750
Half-life time for reachable routes (in seconds) : 900