R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

307
Keepalive time: 60 seconds
Minimum time between advertisements: 30 seconds
Peer preferred value: 0
IPsec profile name: profile001
Site-of-Origin: Not specified
Routing policy configured:
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2::2 600 0 0 0 0 00:00:45 Established
3::3 600 0 0 0 0 00:00:40 Established
Table 72 Command output
Field Description
BGP peer group Name of the BGP peer group.
Remote AS AS number of the peer group.
Type
Type of the peer groups:
• external—IBGP peer group.
• internal—EBGP peer group.
Maximum number of prefixes
allowed
Maximum number of routes allowed to learn from the peer.
This field does not apply to BGP L2VPN.
Threshold
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates a log message.
This field does not apply to BGP L2VPN.
Configured hold time Configured hold interval in seconds.
Keepalive time Keepalive interval in seconds.
Minimum time between
advertisements
Minimum route advertisement interval in seconds.
Peer preferred value
Preferred value specified for routes from the peer.
This field does not apply to BGP L2VPN.
Site-of-Origin SoO for the peer group.
Routing policy configured
Routing policy configured for the peer group.
If no routing policy is specified, this field displays No routing policy is
configured.
This field does not apply to BGP L2VPN.
Members Information about peers included in the peer group.
Peer IP or IPv6 address of the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.