R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

308
Field Description
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv
For the IPv4, IPv6, VPNv4, and VPNv6 address families, this field
displays the number of prefixes received from the peer.
For MPLS L2VPN, this field displays the number of label blocks received
from the peer.
For VPLS, this field displays the total number of label blocks and VPLS
PEs discovered by BGP.
For the IPv4 MDT address family, this field displays the number of MDT
messages received from the peer.
Up/Down Lasting time of the current BGP session state.
State Current state of the BGP session between the local router and the peer.
display bgp network
Use display bgp network to display information about routes advertised by the network command and
shortcut routes configured by the network short-cut command.
Syntax
display bgp network { ipv4 | ipv6 } { multicast | [ unicast ] [ vpn-instance vpn-instance-name ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv4: Displays IPv4 address family information.
ipv6: Displays IPv6 address family information.
multicast: Displays BGP multicast address family information.
unicast: Displays BGP unicast address family information.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays routing information for the
public network.
Usage guidelines
By default, the unicast keyword is used if neither the multicast keyword nor the unicast keyword is
specified.
Examples
# Display information about routes advertised by the network command and shortcut routes configured
by the network short-cut command in the IPv4 unicast address family for the public network.
<Sysname> display bgp network ipv4