R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

21
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
verbose: Displays detailed routing table information, including information about both active and
inactive routes. Without this keyword, the command displays only brief information about active routes.
standby slot slot-number: Displays backup IPv6 routing table information for a card. Without this option,
the command displays IPv6 routing table information.
Examples
# Display brief information about active routes in the IPv6 routing table.
<Sysname> display ipv6 routing-table
Destinations : 3 Routes : 3
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : InLoop0 Cost : 0
Destination: FF00::/8 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
Table 6 Command output
Field Descri
p
tion
Destinations Number of destination addresses.
Routes Number of routes.
Destination IPv6 address and prefix of the destination network or host.
NextHop Next hop address of the route.
Preference Preference of the route.
Interface Output interface for packets to be forwarded along the route.