R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

338
Table 87 Command output
Field Descri
p
tion
Paths
Number of routes:
• available—Number of valid routes.
• best—Number of optimal routes.
Original nexthop
Original next hop of the route. If the route was obtained from a BGP
update message, the original next hop is the next hop IP address in the
message.
OutLabel Outgoing label of the route.
AS-path AS_PATH attribute of the route.
Origin
Origin of the route:
• igp—Originated in the AS. The origin of summary routes and routes
advertised with the network command is IGP.
• egp—Learned through EGP.
• incomplete—Unknown origin. The origin of routes redistributed from
IGP protocols is INCOMPLETE.
Attribute value
BGP path attributes:
• MED—MED value.
• localpref—Local preference value.
• pref-val—Preferred value.
• pre—Route preference.
State
Current state of the route:
• valid.
• internal.
• external.
• local.
• synchronize.
• best.
From IP address of the BGP peer that advertised the route.
Rely Nexthop
Next hop found by route recursion. If no next hop is found, this field
displays not resolved.
IP precedence IP precedence in the range of 0 to 7.
QoS local ID QoS local ID in the range of 1 to 4095.
# Display statistics for public BGP IPv4 unicast routes advertised by the active BGP process to the peer
10.2.1.2.
<Sysname> display bgp routing-table ipv4 peer 10.2.1.2 advertised-routes statistics
Advertised routes total: 2
# Display statistics for public BGP IPv4 unicast routes received by the active BGP process from the peer
10.2.1.2.
<Sysname> display bgp routing-table ipv4 peer 10.2.1.2 received-routes statistics
Received routes total: 2