R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

358
Field Description
InLabel
Incoming label of the IPv6 unicast route, which is assigned by the local 6PE
device.
display bgp routing-table ipv6 unicast outlabel
Use display bgp routing-table ipv6 unicast outlabel to display outgoing labels for BGP IPv6 unicast
routing information.
Syntax
MSR2000/MSR3000:
display bgp routing-table ipv6 [ unicast ] outlabel
MSR4000:
display bgp routing-table ipv6 [ unicast ] outlabel [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
standby: Displays outgoing labels of BGP IPv6 unicast routes for a standby BGP process. If you do not
specify a standby BGP process, the command displays information for the active BGP process.
slot slot-number: Specifies the slot number of the card where the standby process resides. (MSR4000.)
Usage guidelines
The active BGP process backs up BGP peers and routing information to the standby BGP process only
when BGP NSR is enabled. If BGP NSR is disabled, this command does not display anything when you
execute it with the standby keyword.
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display outgoing labels for all public BGP IPv6 unicast routes for the active BGP process.
<Sysname> display bgp routing-table ipv6 outlabel
Total number of routes: 2
BGP local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
* >i Network : 4::4 PrefixLen : 128
NextHop : ::FFFF:3.3.3.3 OutLabel : 1279