R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

399
In BGP IPv6 unicast address family view:
peer { group-name | ip-address | ipv6-address } enable
undo peer { group-name | ip-address | ipv6-address } enable
In BGP-VPN IPv6 unicast address family view/BGP IPv6 multicast address family view:
peer { group-name | ipv6-address } enable
undo peer { group-name | ipv6-address } enable
Default
BGP cannot exchange routing information with a peer or peer group.
Views
BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view, BGP-VPNv4 address
family view, BGP-VPN VPNv4 address family view, BGP IPv6 unicast address family view, BGP-VPN IPv6
unicast address family view, BGP-VPNv6 address family view, BGP L2VPN address family view, BGP
IPv4 multicast address family view, BGP IPv4 MDT address family view
Predefined user roles
network-admin
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer
group must have been created.
ip-address: Specifies a peer by its IP address. The peer must have been created.
ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created.
Usage guidelines
Executing the peer enable command in different views enables BGP to exchange routing information for
the corresponding address families with the specified peer.
• In BGP IPv4 unicast address family view, the command enables the capability to exchange IPv4
unicast routing information. It also adds the learned routes to the BGP routing table of the public
network.
• In BGP-VPN IPv4 unicast address family view, the command enables the capability to exchange
IPv4 unicast routing information. It also adds the learned routes to the BGP routing table of the
specified VPN instance.
• In BGP VPNv4 address family view, the command enables the capability to exchange VPNv4
routing information. In an MPLS L3VPN network, execute the command on PE devices in BGP
VPNv4 address family view.
• In BGP-VPN VPNv4 address family view, the command enables the capability to exchange VPNv4
routing information. In a nested VPN network, execute this command on ISP PE devices in BGP-VPN
VPNv4 address family view to do the following:
{ Enable the PE devices to exchange BGP VPNv4 routing information with ISP CEs.
{ Add the VPNv4 routes learned by the PE devices to the routing table of the specified VPN
instance.
• In BGP IPv6 unicast address family view, the command enables the capability to exchange IPv6
unicast routing information. It also adds the learned routes to the IPv6 BGP routing table of the
public network.