R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

29
display ipv6 routing-table prefix-list
Use display ipv6 routing-table prefix-list to display information about IPv6 routes permitted by an IPv6
prefix list.
Syntax
MSR2000/MSR3000:
display ipv6 routing-table [ vpn-instance vpn-instance-name ] prefix-list prefix-list-name [ verbose ]
MSR4000:
display ipv6 routing-table [ vpn-instance vpn-instance-name ] prefix-list prefix-list-name [ verbose ]
[ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays routing information for the public
network.
prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters.
verbose: Displays detailed information about all IPv6 routes permitted by the IPv6 prefix list. Without this
keyword, the command displays brief information about active IPv6 routes permitted by the IPv6 prefix
list.
standby slot slot-number: Displays backup information about IPv6 routes permitted by the IPv6 prefix list
for a card. Without this option, the command displays information about IPv6 routes permitted by the
IPv6 prefix list.
Usage guidelines
If the specified IPv6 prefix list does not exist, the command displays information about all routes.
Examples
# Create an IPv6 prefix list named test to permit the prefix ::1/128.
<Sysname> system-view
[Sysname] ipv6 prefix-list test permit ::1 128
# Display brief information about the active IPv6 route permitted by the IPv6 prefix list.
[Sysname] display ipv6 routing-table prefix-list test
Routes Matched by Prefix list : test
Summary Count : 1
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0