R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

421
Related commands
• reflect between-clients
• reflector cluster-id
peer route-limit
Use peer route-limit to specify the maximum number of routes that can be received from a peer or peer
group.
Use undo peer route-limit to restore the default.
Syntax
In BGP IPv4 unicast address family view/BGP-VPN IPv4 unicast address family view/BGP VPNv4
address family view/BGP VPNv6 address family view/BGP IPv4 multicast address family view:
peer { group-name | ip-address } route-limit prefix-number [ { alert-only | discard | reconnect
reconnect-time } | percentage-value ] *
undo peer { group-name | ip-address } route-limit
In BGP IPv6 unicast address family view:
peer { group-name | ip-address | ipv6-address } route-limit prefix-number [ { alert-only | discard |
reconnect reconnect-time } | percentage-value ] *
undo peer { group-name | ip-address | ipv6-address } route-limit
In BGP IPv6 multicast address family view:
peer { group-name | ipv6-address } route-limit prefix-number [ { alert-only | reconnect reconnect-time }
| percentage-value ] *
undo peer { group-name | ipv6-address } route-limit
Default
The number of routes that can be received from a peer or peer group is not limited.
Views
BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view, BGP VPNv4 address
family view, BGP IPv6 unicast address family view, BGP VPNv6 address family view, BGP IPv4 multicast
address family view, BGP IPv6 multicast address family view
Predefined user roles
network-admin
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer
group must have been created.
ip-address: Specifies a peer by its IP address. The peer must have been created.
ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created.
prefix-number: Specifies the number of routes that can be received from the peer or peer group, in the
range of 1 to 4294967295. If the following conditions exist, the router will tear down the session to the
peer or peer group and will not attempt to reestablish it:
• The alert-only, discard, and reconnect keywords are not specified.