R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

434
[Sysname-bgp-vpn1] address-family ipv6 unicast
[Sysname-bgp-ipv6-vpn1] preference 20 20 200
primary-path-detect bfd
Use primary-path-detect bfd to configure BGP FRR to use BFD to detect next hop connectivity for the
primary route.
Use undo primary-path-detect bfd to restore the default.
Syntax
primary-path-detect bfd echo
undo primary-path-detect bfd
Default
BGP FRR uses ARP to detect the connectivity to the next hop of the primary route.
Views
BGP view
Predefined user roles
network-admin
Parameters
echo: Uses echo-mode BFD to detect the connectivity to the next hop of the primary route.
Examples
# Configure BGP FRR to use echo-mode BFD to detect next hop connectivity for the primary route.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] primary-path-detect bfd echo
Related commands
• fast-reroute route-policy
• pic
reflect between-clients
Use reflect between-clients to enable route reflection between clients.
Use undo reflect between-clients to disable this function.
Syntax
reflect between-clients
undo reflect between-clients
Default
Route reflection between clients is enabled.
Views
BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view, BGP VPNv4 address
family view, BGP IPv6 unicast address family view, BGP VPNv6 address family view, BGP L2VPN