R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)
443
as-path-acl as-path-acl-number: Specifies an AS path list by its number in the range of 1 to 256, to filter
BGP route flap statistics.
peer ipv4-address: Clears flap statistics for BGP routes learned from the specified IPv4 BGP peer.
peer ipv4-address: Clears flap statistics for BGP routes learned from the specified IPv6 BGP peer.
Usage guidelines
When you execute the reset bgp flap-info ipv4 command:
• If only the network-address argument is specified, the system ANDs the network address with the
mask of a route. If the result matches the network address of the route, the command clears the flap
statistics of the route.
• If the network-address mask or network-address mask-length argument is specified, the command
clears the flap statistics of the route that matches both the specified destination network address and
the mask (or mask length).
By default, the unicast keyword is used if neither the unicast keyword nor the multicast keyword is
specified.
Examples
# Clear flap statistics for the public BGP IPv4 unicast route to network 20.1.0.0/16.
<Sysname> reset bgp flap-info ipv4 20.1.0.0 16
# Clear flap statistics for the public BGP IPv4 unicast routes learned from peer 1.1.1.1.
<Sysname> reset bgp flap-info ipv4 peer 1.1.1.1
# Clear flap statistics for the public BGP IPv6 unicast route to network 2345::/16.
<Sysname> reset bgp flap-info ipv6 2345:: 16
# Clear flap statistics for public BGP IPv6 unicast routes learned from peer 1::1.
<Sysname> reset bgp flap-info ipv6 peer 1::1
# Clear flap statistics for the public BGP IPv4 multicast route to network 20.1.0.0/16.
<Sysname> reset bgp flap-info ipv4 multicast 20.1.0.0 16
# Clear flap statistics for public BGP IPv4 m u l t ic a s t ro u t e s l e a rn e d f ro m p e e r 1.1.1.1.
<Sysname> reset bgp flap-info ipv4 multicast peer 1.1.1.1
# Clear flap statistics for the BGP IPv6 multicast route to network 2345::/16.
<Sysname> reset bgp flap-info ipv6 multicast 2345:: 16
# Clear flap statistics for BGP IPv6 multicast routes learned from peer 1::1.
<Sysname> reset bgp flap-info ipv6 multicast peer 1::1
Related commands
• dampening
• display bgp routing-table flap-info
router id (system view)
Use router id to configure a global router ID.
Use undo router id to remove the global router ID.
Syntax
router id router-id