R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

35
RIB GR state : Phase2-calculation end
RCOM GR State : Flush end
Protocol GR state:
No. Protocol Lifetime FD State Start/End
--------------------------------------------------
1 DIRECT 100 30 End No/No
2 STATIC 480 34 End No/No
3 OSPF 480 36 End No/No
4 ISIS 480 32 End No/No
5 BGP 480 31 End No/No
6 LDP 480 35 End No/No
7 SLSP 480 29 End No/No
Table 10 Command output
Field Descri
p
tion
RIB GR state
RIB GR status:
• Start—GR starts.
• IGP end—All IGP protocols complete GR.
• VPN-triggering end—Optimal route selection triggered by VPN routes
completes.
• VPN-calculation end—Optimal VPN route selection completes.
• Routing protocol end—All routing protocols complete GR.
• NSR-calculation unfinished—NSR has not finished optimal route selection.
• Triggering start—All triggered optimal route selection starts.
• Triggering end—All triggered optimal route selection completes.
• Phase1-calculation end—Optimal route selection phase 1 completes.
• All end—All protocols complete GR.
• Phase2-calculation end—Optimal route selection phase 2 completes.
RCOM GR state
RCOM GR status:
• Start—GR starts.
• VPN-calculation end—Optimal VPN route selection completes.
• VPN-notification end—VPN routes have been delivered to the route
management module.
• Routing protocol end—All routing protocols complete GR.
• NSR-calculation unfinished—NSR has not finished optimal route selection.
• Phase1-calculation end—Optimal route selection phase 1 completes.
• Notification end—All routes have been delivered to the route management
module.
• Phase2-calculation end—Optimal route selection phase 2 completes.
• Flush start—Starts to flush routes to the FIB.
• Flush end—Completes flushing routes to the FIB.
No. Protocol number.
Lifetime Lifetime (in seconds) of routes/labels in the RIB during GR.
FD Handle between the protocol and the RIB.