R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

485
allow-ibgp: Allows redistribution of IBGP routes. This keyword is available when the protocol argument
is set to bgp4+.
allow-direct: Redistributes the networks of the local interfaces enabled with the specified routing protocol.
By default, the networks of the local interfaces are not redistributed. If you specify both the allow-direct
keyword and the route-policy route-policy-name option, make sure the if-match rule defined in the
routing policy does not conflict with the allow-direct keyword. For example, if you specify the
allow-direct keyword, do not configure the if-match route-type rule for the routing policy. Otherwise, the
allow-direct keyword does not take effect.
cost cost: Specifies a metric for redistributed routes, in the range of 0 to 16. The default metric is 0.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters.
Usage guidelines
The import-route bgp4+ command redistributes only EBGP routes. The import-route bgp4+ allow-ibgp
command redistributes both EBGP and IBGP routes.
Examples
# Redistribute routes from IPv6 IS-IS process 7 into RIPng and set the metric for redistributed routes to 7.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] import-route isisv6 7 cost 7
maximum load-balancing
Use maximum load-balancing to specify the maximum number of equal-cost multi-path (ECMP) routes for
load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing number
undo maximum load-balancing
Default
The maximum number of ECMP routes is 32.
Views
RIPng view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of ECMP routes, in the range of 1 to 32. When this argument is
set to 1, RIPng does not perform load balancing.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2