R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

489
ripng enable
Use ripng enable to enable RIPng on an interface.
Use undo ripng enable to disable RIPng on an interface.
Syntax
ripng process-id enable
undo ripng enable
Default
RIPng is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
Examples
# Enable RIPng 100 on GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ripng 100 enable
ripng ipsec-profile
Use ripng ipsec-profile to apply an IPsec profile to a RIPng interface.
Use undo ripng ipsec-profile to remove the IPsec profile from the RIPng interface.
Syntax
ripng ipsec-profile profile-name
undo ripng ipsec-profile
Default
No IPsec profile is applied to the RIPng interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
profile-name: Specifies an IPsec profile by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
This command must reference an IPsec profile. For more information about IPsec profiles, see Security
Configuration Guide.