R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

515
<Sysname> display ospfv3 non-stop-routing
OSPFv3 Process 1 with Router ID 3.3.3.3
Nonstop Routing capability: Enabled
Upgrade phase : Normal
Table 128 Command output
Field Descri
p
tion
Nonstop Routing
capability
NSR status: enabled or disabled.
Upgrade phase
Upgrade phase:
• Normal—Normal status.
• Preparation—Upgrade preparation phase.
• Smooth—Upgrade phase.
• Precalculation—Route pre-calculation phase.
• Calculation—Route calculation phase.
• Redistribution—Route redistribution phase.
display ospfv3 peer
Use display ospfv3 peer to display information about OSPFv3 neighbors.
Syntax
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ] [ verbose ] |
peer-router-id | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
area area-id: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0 to
4294967295 that is translated into the IPv4 address format.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed neighbor information.
peer-router-id: Specifies a neighbor.
statistics: Displays OSPFv3 neighbor statistics.
Usage guidelines
If no process-id is specified, this command displays neighbor information for all processes.
If no area is specified, this command displays neighbor information for all areas.