R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

516
If no interface or no neighbor is specified, this command displays neighbor information for all interfaces.
Examples
# Display the neighbor information for OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer gigabitethernet 2/1/1
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.1
-------------------------------------------------------------------------
Router ID Pri State Dead-Time InstID Interface
2.2.2.2 1 Full/DR 00:00:33 0 GE2/1/1
Table 129 Command output
Field Descri
p
tion
Router ID Router ID of a neighbor.
Pri Priority of neighbor router.
State Neighbor state.
Dead-Time Dead time remained.
Inst ID Instance ID.
Interface Interface connected to the neighbor.
# Display detailed neighbor information for OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer gigabitethernet 2/1/2 verbose
OSPFv3 Process 1 with Router ID 1.1.1.1
Area 0.0.0.1 interface GE2/1/2's neighbors
Router ID: 2.2.2.2 Address: fe80::200:5eff:fe00:100
State: Full Mode: Nbr is master Priority: 1
DR: 2.2.2.2 BDR: None MTU: 1500
Options is 0x000013 (-|R|-|x|E|V6)
Dead timer due in 00:00:38
Neighbor is up for 00:19:07
Neighbor state change count: 120
Database Summary List 0
Link State Request List 0
Link State Retransmission List 3
Neighbor interface ID: 8037
GR state: Normal
Grace period: 0 Grace period timer: Off
DD Rxmt timer: Off LS Rxmt timer: On
Table 130 Command output
Field Descri
p
tion
Router ID Neighbor router ID.