R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

536
Usage guidelines
The value of the GR restart interval cannot be smaller than the maximum OSPFv3 neighbor dead time of
all the OSPFv3 interfaces. Otherwise, GR restart might fail.
Examples
# Configure the GR restart interval for OSPFv3 process 1 as 100 seconds.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] graceful-restart interval 100
Related commands
ospfv3 timer dead
import-route (OSPFv3 view)
Use import-route to redistribute routes.
Use undo import-route to disable route redistribution.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ allow-direct | cost cost | nssa-only |
route-policy route-policy-name | tag tag | type type ] *
undo import-route protocol [ process-id | all-processes ]
Default
OSPFv3 route redistribution is disabled.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
protocol: Redistributes routes from the specified routing protocol, which can be bgp4+, direct, isisv6,
ospfv3, ripng, or static.
process-id: Specifies the process ID of a routing protocol, in the range of 1 to 65536. The default is 1. This
argument takes effect only when the protocol is isisv6, ospfv3, or ripng.
all-processes: Redistributes routes from all the processes of the specified routing protocol. This keyword
takes effect only when the protocol is ripng, ospfv3, or isisv6.
allow-ibgp: Redistributes IBGP routes. It is available only when the protocol is bgp4+.
allow-direct: Redistributes the networks of the local interfaces enabled with the specified routing protocol.
By default, the networks of the local interfaces are not redistributed. If you specify both the allow-direct
keyword and the route-policy route-policy-name option, make sure the if-match rule defined in the
routing policy does not conflict with the allow-direct keyword. For example, if you specify the
allow-direct keyword, do not configure the if-match route-type rule for the routing policy. Otherwise, the
allow-direct keyword does not take effect.
cost cost: Specifies a cost for redistributed routes, in the range of 1 to 16777214. The default is 1.