R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

540
Syntax
non-stop-routing
undo non-stop-routing
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
Default
OSPFv3 NSR is disabled.
Views
OSPFv3 view
Predefined user roles
network-admin
Usage guidelines
OSPFv3 NSR and OSPFv3 GR are mutually exclusive. Do not configure the non-stop-routing command
and the graceful-restart enable command at the same time.
Examples
# Enable NSR for OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] non-stop-routing
nssa
Use nssa to configure the current area as an NSSA area.
Use undo nssa to restore the default.
Syntax
nssa [ default-route-advertise [ cost cost | nssa-only | route-policy route-policy-name | tag tag | type
type ] * | no-import-route | no-summary | [ translate-always | translate-never ] | suppress-fa |
translator-stability-interval value ] *
undo nssa
Default
No area is configured as an NSSA area.
Views
OSPFv3 area view
Predefined user roles
network-admin