R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

42
Table 14 Command output
Field Descri
p
tion
x nexthop(s) Number of next hops.
PrefixIndex Prefix index of the next hop for an ECMP route.
Vrf VPN name.
OrigNexthop Original next hop.
RealNexthop Real next hop.
Interface Output interface.
localAddr Local interface address.
RelyDepth Recursion depth.
TunnelCnt Number of tunnels after route recursion.
TunnelID ID of the tunnel after route recursion.
RefCnt Reference count of the next hop.
FlushRefCnt Reference count of the next hop that is flushed to the FIB.
Flag Flag of the next hop.
Version Version of the next hop.
fib lifetime
Use fib lifetime to set the maximum lifetime for IPv4 or IPv6 routes in the FIB.
Use undo fib lifetime to restore the default.
Syntax
fib lifetime seconds
undo fib lifetime
Default
The maximum lifetime for IPv4 or IPv6 routes in the FIB is 600 seconds.
Views
RIB IPv4 address family view, RIB IPv6 address family view
Predefined user roles
network-admin
Parameters
second: Sets the maximum lifetime for routes in the FIB, in the range of 0 to 900 seconds. When this
argument is set to 0, FIB entries immediately age out after a protocol or RIB process switchover.
Usage guidelines
When a protocol or RIB process switchover occurs and GR or NSR is not configured, FIB entries age out
after the time specified in this command.
Examples
# Set the maximum lifetime for IPv4 routes in the FIB to 60 seconds.