R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

43
<Sysname> system-view
[Sysname] rib
[Sysname-rib] address-family ipv4
[Sysname-rib-ipv4] fib lifetime 60
non-stop-routing
Use non-stop-routing to enable RIB NSR.
Use undo non-stop-routing to restore the default.
Syntax
non-stop-routing
undo non-stop-routing
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
Default
RIB NSR is disabled.
Views
RIB IPv4 address family view, RIB IPv6 address family view
Predefined user roles
network-admin
Examples
# Enable NSR for the RIB IPv4 address family.
<Sysname> system-view
[Sysname] rib
[Sysname-rib] address-family ipv4
[Sysname-rib-ipv4] non-stop-routing
protocol lifetime
Use protocol lifetime to set the maximum lifetime for IPv4 or IPv6 routes and labels in the RIB.
Use undo protocol lifetime to restore the default.
Syntax
protocol protocol lifetime seconds
undo protocol protocol lifetime
Default
The maximum lifetime for IPv4 or IPv6 routes and labels in the RIB is 480 seconds.