R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

558
IPv6 IS-IS commands
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6 routing information. This
chapter describes only IPv6 IS-IS exclusive commands. For other IS-IS configuration commands, see
"IS-IS commands."
address-family ipv6
Use address-family ipv6 to create the IS-IS IPv6 address family and enter its view.
Use undo address-family ipv6 to remove the IS-IS IPv6 address family view.
Syntax
address-family ipv6 [ unicast ]
undo address-family ipv6 [ unicast ]
Default
The IS-IS IPv6 address family is not created.
Views
IS-IS view
Predefined user roles
network-admin
Parameters
unicast: Specifies the unicast address family (the default).
Examples
# Create the IS-IS IPv6 address family and enter its view.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] address-family ipv6
[Sysname-isis-100-ipv6]
auto-cost enable
Use auto-cost enable to enable automatic link cost calculation.
Use undo auto-cost enable to disable the function.
Syntax
auto-cost enable
undo auto-cost enable
Default
Automatic link cost calculation is disabled.