R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

560
Predefined user roles
network-admin
Parameters
value: Specifies the bandwidth reference value in the range of 1 to 2147483648 Mbps.
Examples
# Configure the IPv6 bandwidth reference of IS-IS process 1 as 200 Mbps.
<Sysname> system-view
[Sysname-isis-1] address-family ipv6
[Sysname-isis-1-ipv6] bandwidth-reference 200
Related commands
• auto-cost enable
• isis cost
circuit-cost
Use circuit-cost to set a global IPv6 IS-IS link cost.
Use undo circuit-cost to remove the configuration.
Syntax
circuit-cost value [ level-1 | level-2 ]
undo circuit-cost [ level-1 | level-2 ]
Default
No global link cost is configured.
Views
IS-IS IPv6 unicast address family view
Predefined user roles
network-admin
Parameters
value: Specifies the link cost value. The value range varies by cost style.
• For styles narrow, narrow-compatible, and compatible, the cost value is in the range of 0 to 63.
• For styles wide and wide-compatible, the cost value is in the range of 0 to 16777215.
level-1: Applies the link cost to Level-1.
level-2: Applies the link cost to Level-2.
Usage guidelines
If no level is specified, the specified cost applies to both Level-1 and Level-2.
Examples
# Set the global Level-1 IPv6 link cost of IS-IS process 1 to 11.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] address-family ipv6