R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

579
[Sysname-GigabitEthernet2/1/1] isis ipv6 enable 100
[Sysname-GigabitEthernet2/1/1] isis ipv6 cost 10
isis ipv6 enable
Use isis ipv6 enable to enable IPv6 for an IS-IS process on an interface.
Use undo isis ipv6 enable to remove the configuration.
Syntax
isis ipv6 enable [ process-id ]
undo isis ipv6 enable
Default
IPv6 is disabled for an IS-IS process.
Views
Interface view
Predefined user roles
network-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1.
Examples
# Create IS-IS process 1, and enable IPv6 for the process on interface GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] address-family ipv6 unicast
[Sysname-isis-1-ipv6] quit
[Sysname-isis-1] quit
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ipv6 address 2002::1/64
[Sysname-GigabitEthernet2/1/1] isis ipv6 enable 1
isis ipv6 prefix-suppression
Use isis ipv6 prefix-suppression to enable prefix suppression on an interface.
Use undo isis ipv6 prefix-suppression to restore the default.
Syntax
isis ipv6 prefix-suppression
undo isis ipv6 prefix-suppression
Default
Prefix suppression is disabled on an interface.
Views
Interface view