R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

595
Parameters
type: Specifies the precedence type for IPv6 packets.
value: Sets the precedence for IPv6 packets. Eight precedence values (0 to 7) are available. Each
precedence value corresponds to a precedence type, as shown in Table 145. Y
ou can set either a
precedence value or a precedence type for IPv6 packets.
Table 145 IP precedences and the corresponding types
Precedence value
Precedence t
yp
e
0 routine
1 priority
2 immediate
3 flash
4 flash-override
5 critical
6 internet
7 network
Examples
# Set the precedence to 5 (critical) for IPv6 packets.
<Sysname> system-view
[Sysname]ipv6 policy-based-route aa permit node 11
[Sysname-pbr6-aa-11] apply precedence critical
display ipv6 policy-based-route
Use display ipv6 policy-based-route to display IPv6 PBR policy information.
Syntax
display ipv6 policy-based-route [ policy policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters.
Usage guidelines
If no policy is specified, this command displays information about all policies. If a policy name is
specified, this command displays information about the specified policy.
Examples
# Display all IPv6 policy information.
<Sysname> display ipv6 policy-based-route