R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

597
if-match acl 2000
apply next-hop 1000::1
apply output-interface GigabitEthernet2/1/2 track 1 (down)
apply output-interface GigabitEthernet2/1/3 track 2 (inactive)
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1000::1
Matched: 0
Total matched: 0
<Sysname> display ipv6 policy-based-route interface gigabitethernet 2/1/1
Policy based routing information for interface GigabitEthernet2/1/1:
Policy name: aaa
node 0 deny(not support):
Matched: 0
node 1 permit:
if-match acl 3999
Matched: 0
node 2 permit(no resource):
if-match acl 2000
apply next-hop 1000::1
apply output-interface GigabitEthernet2/1/2 track 1 (down)
apply output-interface GigabitEthernet2/1/3 track 2 (inactive)
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1000::1
Matched: 0 (no statistics resource)
Total matched: 0
Table 147 Command output
Field Description
Policy based routing information for
interface
GigabitEthernet2/1/1(failed)
IPv6 PBR configuration and statistics on GigabitEthernet 2/1/1.
failed indicates the policy (including all its nodes) failed to be assigned
to the driver.
node 0 deny(not support)
node 2 permit(no resource)
Match mode of the node, permit or deny.
not support means the device does not support the match criteria
configured on the node. no resource means the device has insufficient
ACL resources, and failed to assign ACL resources to the node.
if-match acl Matches IPv6 packets against the IPv6 ACL.
apply next-hop Specify a next hop for permitted IPv6 packets.
apply output-interface
GigabitEthernet2/1/2 track 1
(down)
Specify an output interface for permitted packets. The interface status
includes the following:
• up—The interface is up.
• down—The interface is down at network layer.
• inactive—The interface is not in position.