R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

643
MTR commands
apply topology
Use apply topology to specify a topology for the MTR policy node.
Use undo apply topology to remove the configuration.
Syntax
apply topology topo-name
undo apply topology
Default
No topology is specified for the MTR policy node.
Views
MTR policy node view
Predefined user roles
network-admin
Parameters
topo-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters.
Examples
# Specify topology topo1 for node 0 of MTR policy mtr.
<Sysname> system-view
[Sysname] mtr-policy mtr node 0
[Sysname-mtr-policy-mtr-0] apply topology topo1
display mtr-policy
Use display mtr-policy to display MTR policy information.
Syntax
display mtr-policy [ name mtr-policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name mtr-policy-name: Specifies an MTR policy by its name, a case-sensitive string of 1 to 63 characters.
Without this option, the command displays information about all MTR policies.