R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

645
Examples
# Display brief information about all topologies.
<Sysname> display topology
Total topologies : 4
Topology Address-family VRF
base IPv4 default
mt1 IPv4 default
mt2 IPv4 default
mt3 IPv4 default
# Display detailed information about topology mt1.
<Sysname> display topology name mt1
Topology Name and Index: mt1, 1
Address-family: IPv4
Interfaces: LoopBack0, Vlan-interface1000,
Vlan-interface1001, Vlan-interface1002,
Vlan-interface1003
Maximum routes limit : 100
Threshold value(%): 90
Table 158 Command output
Field Descri
p
tion
Total topologies Number of topologies.
Topology Topology name.
Address-family Address family to which the topology belongs.
VRF VPN to which the topology belongs.
Topology Name and Index Topology name and index number.
Interfaces Interface with which the topology is associated.
Maximum routes limit
Maximum number of route prefixes supported by the topology.
Threshold value(%)
Warning threshold for routes supported by the topology.
global-address-family ipv4
Use global-address-family ipv4 to enter global address family view.
Use undo global-address-family ipv4 to delete the global address family view.
Syntax
global-address-family ipv4 [ unicast ]
undo global-address-family ipv4 [ unicast ]
Default
The global address family view is not configured.
Views
System view