R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

651
Default
No topology is created.
Views
Global address family view
Predefined user roles
network-admin
Parameters
topo-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters.
Examples
# Create topology mt and enter its view.
<Sysname> system-view
[Sysname] global-address-family ipv4 unicast
[Sysname-global-ipv4] topology mt
[Sysname-af-topology-mt]
topology ipv4
Use topology ipv4 to associate the interface with a topology and enter IPv4 unicast topology view of the
interface.
Use undo topology ipv4 to remove the configuration.
Syntax
topology ipv4 [ unicast ] topo-name
undo topology ipv4 [ unicast ] topo-name
Default
An interface is not associated with any topology.
Views
Interface view
Predefined user roles
network-admin
Parameters
unicast: Specifies the unicast topology (the default).
topo-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
Before you associate the interface with a topology, you must create the topology.
If the topology name is unicast, you must specify the unicast keyword for the command. Otherwise, the
command cannot take effect.
Examples
# Associate interface Loopback 0 with topology mt1.
<Sysname> system-view
[Sysname] interface loopback 0