R0106-HP MSR Router Series Layer 3 - IP Routing Command Reference(V7)

56
[Sysname] ip route-static fast-reroute auto
ip route-static primary-path-detect bfd echo
Use ip route-static primary-path-detect bfd echo to enable BFD echo packet mode for static route FRR.
Use undo ip route-static primary-path-detect bfd to restore the default.
Syntax
ip route-static primary-path-detect bfd echo
undo ip route-static primary-path-detect bfd
Default
BFD echo packet mode for static route FRR is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables static route FRR to use BFD echo packet mode for fast failure detection on the
primary link.
Examples
# Enable BFD echo packet mode for static route FRR.
<Sysname> system-view
[Sysname] ip route-static 1.1.1.1 32 gigabitethernet 2/1/1 2.2.2.2 backup-interface
gigabitethernet 2/1/2 backup-nexthop 3.3.3.3
[Sysname] ip route-static primary-path-detect bfd echo