R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

105

Figure 24 Network diagram

Configuration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Enable OSPF:

# Configure Router A.

<RouterA> system-view

[RouterA] router id 11.2.1.2

[RouterA] ospf

[RouterA-ospf-1] area 0

[RouterA-ospf-1-area-0.0.0.0] network 11.2.1.0 0.0.0.255

[RouterA-ospf-1-area-0.0.0.0] quit

[RouterA-ospf-1] quit

# Configure Router B.

<RouterB> system-view

[RouterB] router id 11.2.1.1

[RouterB] ospf

[RouterB-ospf-1] area 0

[RouterB-ospf-1-area-0.0.0.0] network 11.2.1.0 0.0.0.255

[RouterB-ospf-1-area-0.0.0.0] quit

[RouterB-ospf-1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] router id 11.1.1.2

[RouterC] ospf

[RouterC-ospf-1] area 0

[RouterC-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255

[RouterC-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255

[RouterC-ospf-1-area-0.0.0.0] quit

[RouterC-ospf-1] quit