R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

131

132

133

134

135

136

137

138

139

140

124

<RouterC> system-view

[RouterC] ospf

[RouterC-ospf-1] area 0

[RouterC-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255

[RouterC-ospf-1-area-0.0.0.0] network 13.1.1.0 0.0.0.255

[RouterC-ospf-1-area-0.0.0.0] quit

[RouterC-ospf-1] quit

3. Configure BFD:

# Enable BFD on Router A and configure BFD parameters.

[RouterA] bfd session init-mode active

[RouterA] interface gigabitethernet 2/1/1

[RouterA-GigabitEthernet2/1/1] ospf bfd enable

[RouterA-GigabitEthernet2/1/1] bfd min-transmit-interval 500

[RouterA-GigabitEthernet2/1/1] bfd min-receive-interval 500

[RouterA-GigabitEthernet2/1/1] bfd detect-multiplier 7

[RouterA-GigabitEthernet2/1/1] return

# Enable BFD on Router B and configure BFD parameters.

[RouterB] bfd session init-mode active

[RouterB] interface gigabitethernet 2/1/1

[RouterB-GigabitEthernet2/1/1] ospf bfd enable

[RouterB-GigabitEthernet2/1/1] bfd min-transmit-interval 500

[RouterB-GigabitEthernet2/1/1] bfd min-receive-interval 500

[RouterB-GigabitEthernet2/1/1] bfd detect-multiplier 6

Verifying the configuration

# Display the BFD information on Router A.

<RouterA> display bfd session

Total Session Num: 1 Up Session Num: 1 Init Mode: Active

IPv4 Session Working Under Ctrl Mode:

LD/RD SourceAddr DestAddr State Holdtime Interface

3/1 192.168.0.102 192.168.0.100 Up 1700ms GE2/1/1

# Display routes destined for 120.1.1.0/24 on Router A.

<RouterA> display ip routing-table 120.1.1.0 verbose

Summary Count : 1

Destination: 120.1.1.0/24

Protocol: OSPF Process ID: 1

SubProtID: 0x1 Age: 04h20m37s

Cost: 2 Preference: 10

Tag: 0 State: Active Adv

OrigTblID: 0x0 OrigVrf: default-vrf

TableID: 0x2 OrigAs: 0

NBRID: 0x26000002 LastAs: 0

AttrID: 0xffffffff Neighbor: 0.0.0.0