R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

140
Interface bandwidth Interface cost
> 2500 Mbps 10
4. If none of the above costs is used, a default cost of 10 applies.
Configuring an IS-IS cost for an interface
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IS-IS view.
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. (Optional.) Specify an IS-IS
cost style.
cost-style { narrow | wide | wide-compatible
| { compatible | narrow-compatible }
[ relax-spf-limit ] }
By default, the IS-IS cost type
is narrow.
4. Return to system view.
quit N/A
5. Enter interface view or IPv4
unicast topology view.
• Enter interface view:
interface interface-type interface-number
• Enter IPv4 unicast topology view:
a. interface interface-type
interface-number
b. topology ipv4 [ unicast ] topo-name
Use either method.
6. Specify a cost for the IS-IS
interface.
isis cost value [ level-1 | level-2 ]
By default, no cost for the
interface is specified.
Configuring a global IS-IS cost
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IS-IS view or
IS-IS IPv4 unicast
topology view.
• Enter IS-IS view:
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
• Enter IS-IS IPv4 unicast topology view:
a. isis [ process-id ] [ vpn-instance
vpn-instance-name ]
b. cost-style { wide | wide-compatible }
c. address-family ipv4 [ unicast ]
d. topology topo-name tid tid
Use either method.
3. Specify a global
IS-IS cost.
circuit-cost value [ level-1 | level-2 ]
By default, no global cost is
specified.
Enabling automatic IS-IS cost calculation
Ste
p
Command Remarks
1. Enter system view.
system-view N/A