R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

201

202

203

204

205

206

207

208

209

210

189

<RouterB> system-view

[RouterB] isis

[RouterB-isis-1] network-entity 10.0000.0000.0002.00

[RouterB-isis-1] quit

[RouterB] interface gigabitethernet 2/1/1

[RouterB-GigabitEthernet2/1/1] isis enable

[RouterB-GigabitEthernet2/1/1] quit

[RouterB] interface gigabitethernet 2/1/2

[RouterB-GigabitEthernet2/1/2] isis enable

[RouterB-GigabitEthernet2/1/2] quit

# Configure Router C.

<RouterC> system-view

[RouterC] isis

[RouterC-isis-1] network-entity 10.0000.0000.0003.00

[RouterC-isis-1] quit

[RouterC] interface gigabitethernet 2/1/1

[RouterC-GigabitEthernet2/1/1] isis enable

[RouterC-GigabitEthernet2/1/1] quit

[RouterC] interface gigabitethernet 2/1/2

[RouterC-GigabitEthernet2/1/2] isis enable

[RouterC-GigabitEthernet2/1/2] quit

3. Configure BFD functions:

# Enable BFD and configure BFD parameters on Router A.

[RouterA] bfd session init-mode active

[RouterA] interface gigabitethernet 2/1/1

[RouterA-GigabitEthernet2/1/1] isis bfd enable

[RouterA-GigabitEthernet2/1/1] bfd min-receive-interval 500

[RouterA-GigabitEthernet2/1/1] bfd min-transmit-interval 500

[RouterA-GigabitEthernet2/1/1] bfd detect-multiplier 7

# Enable BFD and configure BFD parameters on Router B.

[RouterB] bfd session init-mode active

[RouterB] interface gigabitethernet 2/1/1

[RouterB-GigabitEthernet2/1/1] isis bfd enable

[RouterB-GigabitEthernet2/1/1] bfd min-receive-interval 500

[RouterB-GigabitEthernet2/1/1] bfd min-transmit-interval 500

[RouterB-GigabitEthernet2/1/1] bfd detect-multiplier 8

Verifying the configuration

# Display the BFD session information on Router A.

<RouterA> display bfd session

Total Session Num: 1 Up Session Num: 1 Init Mode: Active

IPv4 Session Working Under Ctrl Mode:

LD/RD SourceAddr DestAddr State Holdtime Interface

3/1 192.168.0.102 192.168.0.100 Up 1700ms GE2/1/1