R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

214
Step Command Remarks
6. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
address-family ipv6 [ unicast ]
By default, the BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family is not
created.
7. Enable the router to exchange
IPv6 unicast routing
information with peers in the
specified peer group.
peer group-name enable
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
To configure an IBGP peer group (IPv4 multicast address family):
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number
N/A
3. Create an IBGP peer group.
group group-name [ internal ]
By default, no IBGP peer group is
created.
4. Add an IPv4 peer into the IBGP
peer group.
peer ip-address group group-name
[ as-number as-number ]
By default, no peer exists in the
peer group.
The as-number as-number option
must specify the local AS number.
5. (Optional.) Configure a
description for the peer group.
peer group-name description
description-text
By default, no description is
configured for the peer group.
6. Create the BGP IPv4 multicast
address family and enter its
view.
address-family ipv4 multicast
By default, the BGP IPv4 multicast
address family is not created.
7. Enable the router to exchange
IPv4 unicast routing
information used for RPF check
with peers in the specified peer
group.
peer group-name enable
By default, the router cannot
exchange IPv4 unicast routing
information used for RPF check
with the peers in the peer group.
To configure an IBGP peer group (IPv6 multicast address family):
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number
N/A
3. Create an IBGP peer group.
group group-name [ internal ]
By default, no IBGP peer group is
created.
4. Add a peer into the IBGP peer
group.
peer ipv6-address group
group-name [ as-number
as-number ]
By default, no peer exists in the
peer group.
The as-number as-number option
must specify the local AS number.
5. (Optional.) Configure a
description for the peer group.
peer group-name description
description-text
By default, no description is
configured for the peer group.