R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

218
Ste
p
Command Remarks
6. (Optional.) Configure a
description for the peer group.
peer group-name description
description-text
By default, no description is
configured for the peer group.
7. Create the BGP IPv6 multicast
address family.
address-family ipv6 multicast
By default, the BGP IPv6 multicast
address family is not created.
8. Enable the router to exchange
IPv6 unicast routing
information used for RPF check
with peers in the specified peer
group.
peer group-name enable
By default, the router cannot
exchange IPv6 unicast routing
information used for RPF check
with the peers in the group.
To configure an EBGP peer group by using Method 2 (IPv4 unicast address family):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
N/A
3. Create an EBGP peer group.
group group-name external
By default, no EBGP peer group is
created.
4. Create an IPv4 BGP peer and
specify its AS number.
peer ip-address as-number
as-number
By default, no IPv4 BGP peer is
created.
5. Add the peer into the EBGP
peer group.
peer ip-address group group-name
[ as-number as-number ]
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer ip-address
as-number as-number command.
6. (Optional.) Configure a
description for the peer group.
peer group-name description
description-text
By default, no description is
configured for the peer group.
7. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
address-family ipv4 [ unicast ]
By default, the BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family is not
created.
8. Enable the router to exchange
IPv4 unicast routing
information with peers in the
specified peer group.
peer group-name enable
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.
To configure an EBGP peer group by using Method 2 (IPv6 unicast address family):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A