R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)
220
Ste
p
Command
Remarks
7. Create the BGP IPv4 multicast
address family and enter its
view.
address-family ipv4 multicast
By default, the BGP IPv4 multicast
address family is not created.
8. Enable the router to exchange
IPv4 unicast routing
information used for RPF check
with peers in the specified peer
group.
peer group-name enable
By default, the router cannot
exchange IPv4 unicast routing
information used for RPF check
with the peers in the group.
To configure an EBGP peer group by using Method 2 (IPv6 multicast address family):
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
bgp as-number
N/A
3. Create an EBGP peer group.
group group-name external
By default, no EBGP peer group is
created.
4. Create an IPv6 BGP peer and
specify its AS number.
peer ipv6-address as-number
as-number
By default, no IPv6 BGP peer is
created.
5. Add the peer into the EBGP
peer group.
peer ipv6-address group
group-name [ as-number
as-number ]
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer ip-address
as-number as-number command.
6. (Optional.) Configure a
description for the peer group.
peer group-name description
description-text
By default, no description is
configured for the peer group.
7. Create the BGP IPv6 multicast
address family and enter its
view.
address-family ipv6 multicast
By default, the BGP IPv6 multicast
address family is not created.
8. Enable the router to exchange
IPv6 unicast routing
information used for RPF check
with peers in the specified peer
group.
peer group-name enable
By default, the router cannot
exchange IPv6 unicast routing
information used for RPF check
with the peers in the group.
To configure an EBGP peer group by using Method 3 (IPv4 unicast address family):
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
N/A