R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)
221
Ste
p
Command
Remarks
3. Create an EBGP peer group.
group group-name external
By default, no EBGP peer group is
created.
4. Add a peer into the EBGP peer
group.
peer ip-address group group-name
as-number as-number
By default, no peer exists in the
peer group.
5. (Optional.) Configure a
description for the peer group.
peer group-name description
description-text
By default, no description is
configured for the peer group.
6. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
address-family ipv4 [ unicast ]
By default, the BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family is not
created.
7. Enable the router to exchange
IPv4 unicast routing
information with peers in the
specified peer group.
peer group-name enable
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.
To configure an EBGP peer group by using Method 3 (IPv6 unicast address family):
Ste
p
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
N/A
3. Create an EBGP peer group.
group group-name external
By default, no EBGP peer group is
created.
4. Add a peer into the EBGP peer
group.
peer ipv6-address group
group-name as-number as-number
By default, no peer exists in the
peer group.
5. (Optional.) Configure a
description for the peer group.
peer group-name description
description-text
By default, no description is
configured for the peer group.
6. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
address-family ipv6 [ unicast ]
By default, the BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family is not
created.
7. Enable the router to exchange
IPv6 unicast routing
information with peers in the
specified peer group.
peer group-name enable
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
To configure an EBGP peer group by using Method 3 (IPv4 multicast address family):
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number
N/A