R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

229
Ste
p
Command Remarks
2. Enter BGP IPv6 unicast address
family view, or BGP IPv6
multicast address family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
c. bgp as-number
d. address-family ipv6
multicast
N/A
3. Create a summary route in the
IPv6 BGP routing table.
aggregate ipv6-address
prefix-length [ as-set |
attribute-policy route-policy-name
| detail-suppressed | origin-policy
route-policy-name |
suppress-policy
route-policy-name ] *
By default, no summary route is
configured.
Advertising optimal routes in the IP routing table
By default, BGP advertises optimal routes in the BGP routing table, which may not be optimal in the IP
routing table. This task allows you to advertise BGP routes that are optimal in the IP routing table to all
BGP peers.
To enable BGP to advertise optimal routes in the IP routing table to all peers:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enable BGP to advertise
optimal routes in the IP routing
table to all peers.
advertise-rib-active
By default, BGP advertises optimal
routes in the BGP routing table to
all peers.
To enable BGP to advertise optimal routes in the IP routing table to a peer or peer group:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance vpn-instance-name
N/A
3. Enter BGP IPv4 unicast address
family view or BGP-VPN IPv4
unicast address family view.
address-family ipv4 [ unicast ] N/A