R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

237
Step Command Remarks
3. Configure BGP route reception
filtering policies.
• Reference an ACL or IP prefix list to
filter BGP routes received from all
peers:
filter-policy { acl-number | prefix-list
prefix-list-name } import
• Reference a routing policy to filter
BGP routes received from a peer or
peer group:
peer { group-name | ip-address }
route-policy route-policy-name
import
• Reference an ACL to filter BGP routes
received from a peer or peer group:
peer { group-name | ip-address }
filter-policy acl-number import
• Reference an AS path list to filter
BGP routes received from a peer or
peer group:
peer { group-name | ip-address }
as-path-acl as-path-acl-number
import
• Reference an IPv4 prefix list to filter
BGP routes received from a peer or
peer group:
peer { group-name | ip-address }
prefix-list prefix-list-name import
Use at least one method.
By default, no route reception
filtering is configured.
To configure BGP route reception filtering policies (IPv6 unicast/multicast address family):
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP IPv6 unicast address
family view, BGP-VPN IPv6
unicast address family view, or
BGP IPv6 multicast address
family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6 [ unicast ]
• Enter BGP-VPN IPv6 unicast address
family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6 [ unicast ]
• Enter BGP IPv6 multicast address
family view:
f. bgp as-number
g. address-family ipv6 multicast
N/A