R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

239
Ste
p
Command Remarks
2. Enter BGP IPv4 unicast address
family view, BGP-VPN IPv4
unicast address family view, or
BGP IPv4 multicast address
family view.
• Enter BGP IPv4 unicast address
family view:
a. bgp as-number
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast address
family view:
f. bgp as-number
g. address-family ipv4
multicast
N/A
3. Configure BGP route
dampening.
dampening [ half-life-reachable
half-life-unreachable reuse suppress
ceiling | route-policy
route-policy-name ] *
By default, BGP route dampening
is not configured.
To configure BGP route dampening (IPv6 unicast/multicast address family):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP IPv6 unicast address
family view, BGP-VPN IPv6
unicast address family view, or
BGP IPv6 multicast address
family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast address
family view:
f. bgp as-number
g. address-family ipv6
multicast
N/A
3. Configure IPv6 BGP route
dampening.
dampening [ half-life-reachable
half-life-unreachable reuse suppress
ceiling | route-policy
route-policy-name ] *
By default, IPv6 BGP route
dampening is not configured.